APARTMENT - TYPICAL MODEL CM & RM LAYOUTS

Typical House / Apartment Layout

100% coverage with 10.5m stretch hose

interVac Model CM installed flush into side of kitchen

cabinet and powered from electrical socket within the

cabinet. Typical installation time - less than 30 minutes

NEED MORE COVERAGE?

Add another Model CM or install the Model RM with

multiple inlets.

Typical House / Apartment Layout

100% coverage with 10.5m stretch hose

interVac Model RM surface installation within

under stair closet and powered from electrical

socket in closet.

Remote inlets at ground floor stair landing and

at stairs directly above on 1st floor.

Alternately, two units, one on each floor, can be

installed to avoid having to install any vacuum

pipe work.

Only one cleaning kit required per Home /

Apartment / Office.

Coverage analysis is necessary to reduce costs.

On smaller two level apartments as above,

a single Model CM Unit fitted under the stairs,

will provide 100% apartment coverage for both

floors using a 10.5m hose.

Typical House / Apartment Layout

100% coverage with 10.5m stretch hose

interVac Model CM  installed on ground floor

to service both ground and 1st floors.

interVac Model CM system with single built-in inlet, flush mounted in

Panels / Closets / Storage Compartments.

interVac Model CM system surface mounted - allows for removal and use in the Home /

Garage / Boat / Apartment / Workshop etc...

interVac Model RM system with remote inlet(s) mounted in Storage Bins / Closets /

Cupboards / under Beds.

Model RM

100% coverage with an 8m or 10.5m stretch Hose

interVac Model RM surface mounted within

boat plant room. Inlet in Galley and utility

inlet at power unit. Powered from electrical

socket or hard wired as necessary.

Model CM

100% coverage with a 10.5m stretch Hose

interVac Model CM installed flush into side of

galley cabinet and powered from electrical

socket within the cabinet or hard wired as necessary.